ABX Pentra 80 RAB108EA, Руководство пользователя

Страница: 106 / 306

Pentra 80
4–14
Pentra 80 - User Manual - RAB108EA
2. Worklist
2.1. Overview
A worklist is a list of orders generated on a daily basis. These orders can include:
◆ orders for samples that have not been analyzed
◆ Orders for samples that have been analyzed, but a «Rerun» status has been requested. Re-
runs can be automatic according to the settings in «System Rules» Section 5,
4.2. Rerun
conditions , page 5-13 or Manual reruns from the «Results» screen (see 6.1.8. Rerunning
sample manually, page 4-51).
Once the sample order has been analyzed and automatically matched to an order, the orders
are removed from the worklist.
The orders are also removed from the worklist when the operator manually matches them to
a result (see
6.2.3. Results/orders matching, page 4-54).
Orders can be entered into the Worklist as followed:
◆ Manually from the Worklist (see 2.3.1. Creating an order, page 4-16) or from the «Re-
sults» screen, if you are requesting a «Rerun» (see 6.1.8. Rerunning sample manually,
page 4-51).
◆ Automatically from a host computer (non modifiable)
Worklist functions are described in the following chapter sections:
– 2.2. Accessing the Worklist function, page 4-14
– 2.3. Worklist grid, page 4-15
– 2.4. Rack view, page 4-20
2.2. Accessing the Worklist function
Select the «Worklist» key on the generic toolbar.
Fig. 4–7 Worklist access
The worklist is available in two screens with use of the following buttons: