[49]
wAppLoxx Pro Control Complete Instructions
Guard user:
If users have access as a guard user, they can only “disarm” systems in the allocated access
group when the alarm is triggered and receive access permissions on that basis. These users
can “arm” the system again once after establishing the cause of the alarm.
To do this, an interface to the alarm system will need to have been configured
(see Chapter 13.1)
Enable arm/disarm:
Users are authorised to “arm” and “disarm” the door systems for the selected access group.
Arm only:
Users are only authorised to “arm” the door systems for the selected access group.
Access groups
:
Select the access groups to which the users should have access. By selecting the access
groups, users have access to the doors in the access group with the assigned schedule.
Without an access group, users cannot be granted any access permissions. For
this reason, each user should be assigned at least one access group.
