Abus TVIP11502, Руководство пользователя

Страница: 64 / 324

64
4.2 Status LEDs
LED Color Description
Network info LED Off Network cable not connected or wireless mode
purple / blue flashing
(high frequent) Start-up procedure
Blue flashing (high
frequent) Start-up procedure finished, normal working mode
Status info LED Red on continuousely Start-up procedure
Blue on continuousely IP address successfully assigned (Note: On manual
setup of IP address, a wrong IP address can be
applied. In this case the blue LED is continuously on
as well)
4.3 Using the microSD slot
Disconnect the power supply before inserting the microSD
card.
The microSD card can only be inserted into the socket in a specific
position. The card protrudes out of the slot by about 4 mm when
positioned correctly.
The card is detected by the camera when the power supply is
reconnected, and can then be used as desired.
The microSD card cannot be replaced when the system is in
operation!
4.4 Restoring the factory settings
Camera restart Press the button until the blue LED goes out -> constantly red
during camera restart -> constantly blue after successful
camera restart
Restoring the factory settings Press the button until the LED lights up blue constantly ->
constantly blue after successful camera restart