Abus TVHD80100, Руководство пользователя

Страница: 94 / 408

Camera
94
Parameter Notification
Full Screen Monitoring The camera is displayed as
a full-screen picture in live
cast
Audible Warning The device emits a repeat-
ing tone
Notify CMS Sends an alarm signal to a
PC with ABUS CMS soft-
ware. The software must be
enabled and the recorder set
to surveillance mode on the
PC.
Send E-Mail An e-mail is sent to a specif-
ic e-mail address
Trigger alarm output See page 46

Confirm the settings by clicking Apply and leave the
menu with OK
Video signal loss
Select the camera channel under “Camera”.
Set t
he checkmark for the alarm in the event of a “Video
Loss”.
Armin Schedule
Select the TAB Arming Schedule.
Here you set the times when the reactions in the TAB
Reaction are triggered.
1. Select the day and enter the schedule.
Note
You can define up to 8 time periods (each from
00:00 to 00:00). The times in the individual peri-
ods must not overlap.
2. Select whether the settings should be applied to all
days of the week with using Copy .
3. Confirm the settings by clicking Apply and leave the
menu with OK.
Handling
Click on the TAB Handling.
Here you can configure the behavior of the recorder dur-
ing a detected event (for example: motion got detected)
by clicking the respective check box.
Parameter Notification
Full Screen Monitoring The camera is displayed as
a full-screen picture in live
cast
Audible Warning The device emits a repeat-
ing tone
Notify CMS Sends an alarm signal to a
PC with ABUS CMS soft-
ware. The software must be
enabled and the recorder set
to surveillance mode on the
PC.
Send E-Mail An e-mail is sent to a specif-
ic e-mail address
Trigger alarm output See page 46

Confirm the settings by clicking Apply and leave the
menu with OK