7
English
Nr
Label
Comment
1
Networking-Button
For inclusion / exclusion of the siren in a Z-Wave Gateway,
factory reset
2
Loudspeaker
In case of an alarm, a 95dB loud signal tone sounds here
3
Power Plug
For connection in the socket
4
Flashing Light
In case of alarm the ring lights up red
3.3 Operating Principle
The SHSG10000 was developed for use in home automation systems that use the Z-
Wave wireless standard. The siren serves as an alarm device and is equipped with a
loud siren (up to 95 dB) and a red LED flash. Thanks to the integrated backup battery,
the siren can still alert for up to 5 minutes or operate in standby mode for approx. 4
hours, even when removed from the power supply.
3.4
Performance features
The ABUS Z-Wave SHSG10000...:
-
… is an radio siren with integrated backup battery
-
… is Z-Wave PLUS compatible & certified
-
…supports the Z-Wave S2 Standard (Security 2)
-
… alarms loudly by the integrated 95dB siren
-
… has a red LED flash which lights up in case of alarm
-
… was developed for indoor use
3.5
Use in systems of different manufacturers
Communication is via the Z-Wave EU frequency (868.42 Mhz). You can integrate the
device into any Z-Wave network with a certified Z-Wave gateway, regardless of
manufacturer. All non-battery powered nodes in the network act as repeater to increase
the durability of the network.
4. Overview of functions
4.1. Inclusion / Add Device
A
Plug the device into a socket
