10
English
5. Advanced Z-Wave Parameters
5.1. Association Group Information
Z-Wave devices can control other devices directly. This direct control is called in Z-
Wave association. For this purpose, the device ID of the device to be controlled must
be stored in the controlling devices. This is done in so-called association groups. An
association group is always linked to an event in the controlling device (pressing a key
or triggering a sensor). When this event occurs, a control command - usually a BASIC
SET - is sent to all devices stored in an association group.
The siren supports the following association group:
Group
Number
Maximum
Devices
Transmitted Content
Group 1
0x05
Association group 1: Lifeline association group Include
command classes: Switch Binary report ,Battery and Device
Reset Locally notification.
5.2. Supported Command Classes
1
Z-Wave plus InfoVersion 2
2
Switch Binary Version 1
3
Association Version 2
4
Association Group Info Version 1
5
Transport Service Version 2
6
Version Version 3
7
Manufacturer Specific Version 2
8
Device Reset Locally Version 1
9
Powerlevel Version 1
10
Security 2 Version 1
11
Supervision Version 1
12
Basic Version2
