background image

 

English 

The battery must not be directly exposed to heat or sunlight, and must not be 
stored in a place with a very high temperature. 

The battery must not come into contact with water. 

The battery must not be dismantled, pierced or otherwise damaged. 

The battery contacts must not be short-circuited. 

Change low batteries in good time. 

Always change all the batteries at the same time and use batteries of the same 
type. 

 Leaky or damaged batteries can cause chemical burns on contact with the skin. 
In this case, wear protective gloves. Clean the battery compartment with a dry 
cloth. 

 

2.6.  Important information on battery disposal 

Batteries  with  this  label  do  not  contain  harmful  substances  such  as 
cadmium,  lead  and  mercury.  However,  used  batteries  must  not  be 
disposed of  along with household  waste in accordance with the battery 
directive.  To  protect  natural  resources  and  promote  the  recycling  of 
materials, separate the batteries from other waste and deposit them at a 
local recycling center. An additional label with the chemical symbols for 

Hg, Cd or Pb means that the batteries contain quantities of mercury, cadmium or lead 
which exceed the restrictions set by the EU Directive 2006/66/EG. If batteries are not 
disposed  of  properly,  these  substances  can  cause  harm  to  human  health  or  the 
environment 

 

 

2.7.  Cleaning 

 Dusty devices must be cleaned. You can clean dust from the air vents using a 
vacuum cleaner or compressed air. If necessary, you can remove the dust with 
a brush. 

You can clean the surface using a cloth slightly dampened in soapy water. Only 
use suitable microfiber cloths for high-gloss surfaces. 

Do not allow water to penetrate the device. 

Do not clean the device in a dishwasher. 

Do  not  use  sharp,  pointed,  abrasive  or  corrosive  cleaning  materials  or  hard 
brushes. 

Do not use chemicals. 

Do not use flammable liquids for cleaning the device.  

 

2.8.  Information on device disposal 

Important:  The  EU  Directive  2012/19/EU  regulates  the  proper  return, 
treatment and recycling of used electronic devices. This symbol means 
that  in  the  interest  of  environmental  protection  the  device  must  be 
disposed of separately from household or industrial waste at the end of 
its  service  life  in  accordance  with  applicable  local  legal  guidelines. 
Disposing of used devices can be done at official recycling centers in your 

country. Obey local regulations when disposing of material. Further details on returns 

Содержание SHMK10000













Отзывы: