Abus PR2700, Инструкция по монтажу и эксплуатации

Страница: 43 / 68

43
Fitting the lock body
1. Set and mark the position of the lock body on the door panel (Fig. 3+4).
2. Mark a hole Ø 51–55 mm in the middle accordingly Fig. 9 and drill with a milling cutter/
hole saw from both sides.
Before fitting the lock body, remove the cover hood corresponding to Fig. 10.
Fig. 9
½ ½
Ø 51 – 55 mm
Fig. 10
Fig. 13
Fig. 12
Ø 4,2
x 22
mm
Fig. 11
3. Mount the lock body, attach the escutcheon at door exterior (Fig. 11).
4. Position lock body corresponding to Fig. 12.
Pre-drill the position of the mounting screws (wood Ø 3,0 mm/metal Ø 3,5 mm)
and tighten the lock body with screws Ø 4,2 x 22 mm.
Note: With cavity doors, pre-drill Ø 6mm, use supplied bridging cartridge and tighten
with Ø 4 x 35 mm screws corresponding to Fig. 13.
Caution! Do not overwind.
Ø 4 x 35 mm
GB