13
English
2.4. Reset to factory settings
Press and hold the Link button for at least 5 seconds.
Release the button when the red LED stops blinking
and lights up continuously. The device is now reset to
factory settings.
Hint:
This procedure should only be used if the primary
gateway is not capable of acting. If the device is set to
factory default, the status is set to "not included" and
the association settings and possible configurations
are reset to default.
2.5. Wake-up / Wake up device
Press the Link button once to wake up the device. It
will then establish a connection to the Z-Wave gateway
and transmit the current status.
1x
