manualshive.com logo in svg

Abus IPCB42500, Руководство пользователя

Поделиться
Скачать
Abus IPCB42500 Скачать руководство пользователя страница 25

 

81

7.5 Advanced camera settings 

 

7.5.1 Video 

 

7.5.1.1 Image 

 

 

 
Brightness, contrast, saturation, hue: 

Adjust these values to suit the ambient conditions. 

Sharpness: 

set the electronic oversharpening for the image (edge 
overdraw) 

Iris mode: 

choose between manual and automatic iris control, depending 
on your model. If only one mode is available, then it is the only 
mode offered. 

Exposure time: 

select a value for the fixed exposure time. 

Gain: 

The higher the value is, the lighter the image is in poor lighting 
conditions and therefore the higher the image noise is. 

Day/night switching: 

select a method for switching between day and night mode.

 

Day: the camera stays in day mode.

 

Night: the camera stays in night mode.

 

Auto: Automatic switching according to light conditions

 

Schedule: switching at fixed times. You must enter the day start 
time and day end time.

 

Triggered by event: switching is performed by triggering the 
switching input. The output status can be achieved via the 
status option if the input is not triggered. 

Sensitivity: 

Switching threshold: the lower the value, the later the camera 
switches to night mode. 

Switch time: 

delay in seconds until switching to day or night mode. 

Overexposure protection: 

prevents glare effects from objects that are too close when IR 
lighting is enabled. 

BLC: 

backlight compensation with reference to a selected area 

Содержание IPCB42500


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды