Abus IPCB24500, Руководство пользователя

Страница: 86 / 267

86
10.4.2 Network
10.4.2.1 IPv4 Settings
DHCP:
the IP address, subnet mask, gateway (default router) and address for
the DNS server are obtained automatically from a DHCP server. An
activated DHCP server must be present in the network in this case.
The fields on this page are deactivated in this mode and serve as
informational fields for the data obtained.
Static IP address: manual setting of the network parameter for IPv4.
IP address: manual setting of the camera's IP address
Subnet mask: manual setting of the camera's subnet mask
Gateway: manual setting of the camera's gateway IP address (also known as
default router)
DNS server 1: manual setting of the DNS server's IP address
DNS server 2: alternative IP address of a DNS server
10.4.2.2 Ports
HTTP port:
the default port for HTTP transmission is 80. If several IP cameras are
located on one subnet, each camera should have its own unique HTTP
port.
RTSP port: the default port for RTSP transmission is 554. If several IP cameras
are located on one subnet, each camera should have its own unique
RTSP port.
RTSP authentication: when authorising an activated RTSP, you must give your username
and password for the video to be requested by a client.
If the camera is to be accessed via routers (e.g. from the internet to the local
network), port forwarding must be set up for the HTTP and RTSP port in the router. If
HTTPS is also being used, port forwarding must be set up for the HTTPS port too.
10.4.2.3 DDNS
Activate DDNS:
ticking the checkbox activates the DDNS function.
Select service: select a service provider for the DDNS service.
Username:
user account identification with the DDNS service provider
Password: account password with the DDNS service provider
Host name: registered host name with the DDNS service provider
Further information on the "ABUS SERVER" can be found on the help page at the
following address:
https://www.abus-server.com/faq.html