Abus HomeTec Pro, Инструкция по монтажу и эксплуатации

Страница: 15 / 49

28 29
5.1 Operating keys and LED displays for the drive
Navigation
Unlock /
Exit
Lock /
Confirm
LED
shining flashing flashing
rapidly
5.
• Download the ABUS HomeTec Pro app and enable Bluetooth® on your
smartphone.
• Start the app and follow the instructions in the app.
• As an alternative to a smartphone, the door lock power unit can also be
operated with other HomeTec Pro components.
• Pay attention to the assignment of the different keycards to the products,
and always scan the correct keycard.
• To program a component (e.g. CFF3100 remote control), start by pressing
the button “Add HomeTec Pro/component”.
• Always keep ABUS keycard(s) in a secure place even after the teaching
process! You need the keycard for software updates, if you lose your
smartphone, and for proof of ownership for matters related to warranty
claims and repair. Do not give the card to third parties.
To guarantee proper function, we expressly recommend performing
updates in the app and software/firmware updates for HomeTec Pro
components in a timely manner. The app will provide information on this.
You can also perform the respective update in the component’s settings.
HomeTec Pro
HomeTec Pro App
Rapidly flashing LEDs and rapid beep
indicate a fault to be rectified
check!
5.2
5.2 a
Adjustment of the door
or cylinder.
5.2
Optional: Program the drive on the door in
its factory default state or after a factory reset
(programming is intended to be done in the
ABUS HomeTec Pro app)
aprox. 3 sec. - 10 sec.
turns automatically
(Route learning cycle)
+
press 3 sec.
open
press
turns automatically
(Torque learning cycle)
close
5.2 a
press
=