Abus FUBW50110-1, Инструкция по установке и руководство пользователя, Страница: 31 / 108

Installation
31 | E N
Danger
Note
Thanks to an internal tamper contact, it is not possible to tamper with the housing of
either detector model or for them to be removed from a wall.
A moulded part in the recess of the back plate serves as an anti-removal wall
contact. This moulded part is mounted to the wall with screws.
If this is not done, tamper detection for the wall is deactivated.
Step 3: Programming the motion detector
•
Set the receiver component to programming mode. Follow the instructions provided in your
receiver instructions.
Wireless option
•
Trigger the tamper contact of the motion detector to send a tamper message to the receiver
component.
IR option
•
Hold the LED of the motion detector close to the IR receiver of the wireless extension (RFX).
Now trigger the tamper contact of the motion detector to send a tamper message to the
receiver component.
•
Ensure that the motion detector has been recognised by your receiver component.