Abus FU9010, Руководство по эксплуатации

Страница: 9 / 56

6
Downloader Software (DL)
The DL software (optional accessory) is used to program the system from a PC. As user,
you can configure the system and keep an eye on its current state.
Entry and exit delay
The entry delay time is a period you can define to allow you to disarm the system with
your PIN after opening the door to your house. The exit delay time gives you enough
time to leave your property after arming the system. If you operate your system with a
remote control unit, you do not normally need an entry/exit delay time.
Event memory
The event memory records all system events and messages. You can view this list on
the system display or using the downloader software.
Radio-controlled remote control
Your remote control is a transmitter with 4 buttons. You use it to activate/deactivate your
system, trigger a panic alarm or switch a relay output. With the relay output, you can
your entrance lighting or control household appliances attached to the system,
depending on your requirements.
Chime
You can assign the “chime” property to any (burglary) zone (see Zone). Even if your
system is inactive, the control panel informs you if one of these zones is opened.
For example: You can set the chime so that it announces the arrival of a customer every
time the entrance door is opened (e.g., with a door chime).
When the system is activated, the opening of a “chime” zone naturally triggers an alarm.
Grand Master, Master, Manager
Grand Master, Master and Manager are system users (similar to an administrator,
advanced user, etc.). They have a higher authorisation level and can make more
settings to the system (e.g.: adding a new user PIN).
Command centre
The ABUS wireless alarm system can be set up to send alarms to an emergency
command centre by voice message. The emergency command centre monitors the
activities of many security systems round the clock and contacts the police, the fire
brigade or the authorities responsible in the event of an alarm.
Scheduler
You can use the scheduler to automate particular functions of your system (e.g.:
activate/deactivate the system at a certain time, control switch outputs, etc.).