Abus DIGI-LAN TV7210, Руководство по установке

Страница: 181 / 245

57
thu 0/1 Disable/Enable Thursday weekly schedule check box
fri 0/1 Disable/Enable Friday weekly schedule check box
sat 0/1 Disable/Enable Satday weekly schedule check box
begin_time hh:mm:ss Begin time of weekly schedule
end_time hh:mm:ss End time of weekly schedule
exclude 0/1 Disable/Enable all the time except for the above schedule
check box
eventop 0/1 Disable/Enable Event operation
delay
1~999
Delay seconds before detect next event
prevnum 0~6 Number of pre-trigger event images
ssfprefix <text string shorter
than 60 characters>
Snapshot file name prefix for both event and sequential
operation
dihigh 0/1 Enable/Disable trigger when input is high
dilow 0/1 Enable/Disable trigger when input is low
dirise 0/1 Enable/Disable trigger when input is rising
difall 0/1 Enable/Disable trigger when input is falling
motion1 0/1 Enable/Disable trigger when motion int window #1 is
detected
motion2
0/1
Enable/Disable trigger when motion int window #2 is
detected
motion3
0/1
Enable/Disable trigger when motion int window #3 is
detected
ioalarm 0/1 Enable/Disable DO trigger when DI condition matched
mdalarm 0/1 Enable/Disable DO trigger when motion detection condition
matched
ioupload
0/1
Enable/Disable upload snapshot when DI condition matched
mdupload 0/1 Enable/Disable upload snapshot when motion detection
condition matched
seqop 0/1 Enable/Disable sequential operation
sinter 1 ~ 99999 Interval of sequential snapshot in second
mail Send snapshot by e-mail smethod
ftp Send snapshot by ftp
suffix 0/1 Enable/Disable FTP put snapshots with date and time suffix
resetdo 0/1 Reset/No reset DO when click save button
Example: Enable sequential send snapshot by every 1 second with email.
http://myserver/setup/app.vspx?method=set&exclude=1&eventop=0&seqop=1&
smethod=mail&sinter=1
Drive the digital output
Note: This request requires the privilege of I/O access control.
Method: GET/POST
Syntax:
http://<
servername >/cgi-bin/setdo.cgi?do1= <state> [&do2=<state>]
[&do3=<state>][&do4=<state>][&return= <return page> ]
Where state is H, L. H means NC (normal close) connected with COMMON and L means NO (normal
open) connected with COMMON. The number of DO dependents on the server type.
parameter Value
description
H – NC connected with COMMON
do<num> <state>
L – NO connected with COMMON
return
<return page>
Redirect to the page <return page> after the parameter is