57
10.9 Event log
When an alarm call is transmitted successfully, the Terxon PSTN dialer
saves the last message transmission in the event log.
1. Enter your programming code (default: 1234). The following
message is shown in the display:
READY
Press
. The display shows the following:
VIEWLOG-
Press
to display the last event. In this example, message A has
been transmitted to telephone number 3 and confirmed.
A> --3-
IMPORTANT
BLANK in the display means that no events are available. The display
“A>----” indicates that the transmitted message A was not confirmed by
any recipients.
Press
to exit the event log.
Press
to end data entry.