*Specifications are subject to changes without notice.
7
SYSTEM OPERATIONS
Setting up as a stand alone controller
2.1 Preparations
Remove the Smart Controller from the package and prepare a PC to configure the
Smart Controller. For PC without existing serial port, a USB to Serial (Female) cable is
required
There’s no need to install or launch the Smart Controller software when programming for
the Smart Controller to act as a standalone controller. If the Smart Controller software
is running, close and remove it from the task manager before connecting the Smart
Controller to the PC.
Use the Smart Controller software settings to adjust the baud rate, parity and stop bit to
match that of the equipment. Next configure the commands for the equipment using the
serial communication function in the software.
For more information on how to set up the keys using the Smart controller software, please
download the Smart Controller Software Guide by scanning on the QR code or clicking on
the following link: