User Operation Guide
*Specifications are subject to changes without notice.
6
BUTTON CONTROL
When the switcher is in manual switching mode, the AUTO LED goes out. Please follow the below
steps to switch input source to output channel.
1) Press any one of six input buttons to select input source, and the corresponding LED turns blue.
2) Press either HDBT or HDMI output button to select output channel, and the corresponding LED
turns blue.
3) Press the input button again to confirm switching setting, otherwise, it will automatically confirm
after three seconds.
4) The LED of both the input source and the output will blink thrice to indicate that the change was
made.
Please follow the steps below to enable auto switching mode for HDBT or HDMI output.
1) Press AUTO, and the button LED turns blue.
2) Press either HDBT or HDMI output button, and the corresponding LED turns blue.
3) Press AUTO button again to confirm the setting, otherwise, it will automatically confirm after
three seconds.
4) Repeat the above three steps to exit auto mode.
(Note: the input source will remain in the current settings.)
Note: The
AUTO LED
illuminates blue when the
HDMI
output or
HDBT
output is in auto mode.
When in auto mode, the switcher will switch according to the following rules:
●
The switcher will switch to the first available active input starting at input 1 to 6 by default. (The
switching priority can be set by RS232 command and GUI.)
●
New input: The switcher will automatically select the new input once detecting a new input.
●
Reboot: If power is restored to the switcher, it will automatically reconnect the input before
powered off.
●
Source removed: When an active source is removed, the switcher will switch to the first available
active input according to the priority.
●
In auto mode, the input source also can be switched by the manual switching steps.
Press volume knob to choose
AUDIO 1
or
AUDIO 2
audio needs to be adjusted, the corresponding
LED will turn blue
●
Adjusting the knob in clockwise direction to increase sound volume.
●
Adjusting the knob in anti-clockwise direction to decrease sound volume.
●
Press and hold the knob for at least three seconds to mute/unmute the selected audio.
Manual Switching
Auto Switching
Sound Volume Control
