6
*Specifi cations are subject to changes without notice.
SYSTEM OPERATIONS
IR Blaster
IR Blaster
IR Receiver
IR Receiver
IR Pass-through
IR Socket
[Configuration of IR 3.5mm Jack]
IR BLASTER:
connect the IR blaster to emit IR command signals received from the IR receiver
of the far end AVOIP transmitter/receiver to control the corresponding devicees
I
R RECEIVER:
connect the IR receiver to receive IR command signals from the IR remote
Incorrect placement of IR Blaster and Receiver may result in the failure of
the IR extenders. Please check carefully before plugging in the IR extender
to the respective IR sockets. Warranty will not cover any damages caused by
incorrect or improper usage.
You can use any IR extension cables available in the market that are compatible to the configuration
of the IR sockets as replacement if necessary. However, please note that IR cables longer than 2m
(6-ft) may not work.
CAUTION
