User Operation Guide
4
*Specifi cations are subject to changes without notice.
PANEL DESCRIPTIONS
No. Name
Description
1
USB
(USB 2.0 downstream port)
Connect to USB flash drive or other USB devices
2.
HDMI Out
Connects to a HDMI display.
3.
HDMI IN
Connects to a local HDMI source
4.
Analog audio line out
Connect to an audio output/speaker
5.
+5V DC
Connect to 5V DC power supply
6.
Link LED indicator
[Blinking] When unit is first connected to a Cat-5/5e/6 cable
[Stay on] When unit is successfully linked to a transmitter
7.
System LED indicator
[Blinking] When unit is first connected a power supply
[Stay on] After booting, when device is ready
8.
Info LED indicator
When the LED check funtion is activated on the GUI, the red LED
will blink for 30 seconds.
9.
RJ-45
Connects to Gigabit Ethernet Switch or to a transmitter
10. Dip Switch
Video channel selection
11. IR Blaster
Infrared 3.5mm socket for IR blaster
12. IR Receiver
Infrared 3.5mm socket for IR receiver
13. RS-232
Connect to serial communication port (DSUB-9 pin)
14. Dip Switch
RS-232 mode selection, [ON] debug mode; [OFF] bypass mode
IP-AS11R/G (Receiver)
3
4
5
1
6
8
7
9
10
11
12
13
14
2
