Agile
Bruksanvisning / Use Instructions ver 1.0
A
Page 2 of 6
Side Table
To access the
table, pull out all
the way and
then turn
counter
clockwise. To
reverse, turn it
back and push
onto table front.
Mounting the feet and lifting
If possible leave the screen wall on it's pallet
while mounting the feet. If not possible, lift it to
a table or elevated supportive surface. Be at
least 3 persons to perform the heavy lifts
during this assembly! In some cases 4 persons
is good.
Step 1. Mount the feet using a 5 mm allen key
to fasten Screw M8 (3) with Spring washer (4)
in between. Tighten the screws so the washers
becomes compressed and then another 1/8
turn.
Step 2. Carefully lift the screen wall onto some
books or a carpet or similar on the floor.
Step 3. lock one lower wheel and raise the wall
to it´s wheels. It is good to have persons that
can keep this heavy product in balance during
the lift and raise.
x 3
Lock this wheel
before raise!
x 3
Retractable
USB-C cable
Step 1
Step 2
Step 3
3
4
2
1
