Page 2 of 7
STAGE 1 MOD:
Vertical waveshaping for subtle phasing and PWM-style effects
STAGE 2 MOD:
Inward wavefolding for additional harmonics and harder PWM-style effects
STAGE 3 MOD:
Feedback and saturation amount fed back into stage 1
INPUT GAIN/ATTEN:
Pre-effect gain/attenuation up to +/- 50% at SIGNAL IN
STAGE 1 CV:
Sets the level of the external CV input for stage 1 from 0% to 100%
STAGE 2 CV:
Sets the level of the external CV input for stage 2 from 0% to 100%
STAGE 3 CV:
Sets the level of the external CV input for stage 3 from 0% to 100%
OUTPUT GAIN/ATTEN:
Post-effect gain/attenuation up to +/- 50% at the full- and half-wave outputs
STAGE 1 CV IN:
DC-coupled input for external CV. Accepts up to +/-10V AC and DC signals
STAGE 2 CV IN:
DC-coupled input for external CV. Accepts up to +/-10V AC and DC signals
STAGE 3 CV IN:
DC-coupled input for external CV. Accepts up to +/-10V AC and DC signals
SIGNAL IN:
Main DC-coupled input. Accepts up to +/-10V AC and DC signals
HALF-WAVE OUT:
DC-coupled, half-wave rectified output, allows positive AC and DC signals
FULL-WAVE OUT:
DC-coupled, full-wave output, /- AC and DC signals
MOUNTING HOLES:
Accepts M2.5 or M3 screws in Doepfer or Analogue Systems spacing width
© 2011 Abstract Data Ltd.
http://www.abstractdata.biz
Version 1.0 October 2011
1: Front
