Absen A27 Pro Series, Руководство пользователя

Страница: 20 / 23

A27 Pro Series User Manual - 18 -
4.2 Signal Cable Wiring
The signal cable uses RJ45 CAT5 network cable, and the network cable interface of the
cabinet can be used for input and output. For the "S" type of up-down connection, please
calculate the resolution according to the pixels of each cabinet and connect the signal
cables according to the loading range of the sending card.
Note: The range of loaded pixels of each net port cannot exceed 655360 points (as
shown in the following figure)
4.3 The test of setting up an electric circuit
After the cabinet connection is completed, please use a multimeter to measure whether
there is short circuit at the AC input (L/N/PE) and DC output (VCC/GND) of the power
supply. If a short circuit is found, please check the circuit carefully. After ensuring the
cable is normal, switch on the power to electrify the cabinets to work.
Note: Please refer to the software user manual for software operation.
laptop
HDMI
Sending Box
RJ45 Signal Cable