Absco Industries
Assembly Instruction Manual
LARGE GABLE SHED
N3/C1 FRAME KIT
FOR WORKSHOP & UTILITY MODELS
Model: CYCWKUTK
02/03/21
1.3
13
INSTALL EXTRA FASTENERS
Absco sheds sheets have punched holes typically spaced at 592mm from centre to centre.
To achieve a cyclonic wind rating additional screws will need to be installed to reduce these distances.
The fastener intended at these positions is FAST001, a 10mm self tapping screw.
Pre-drill and reinforce with extra screws at
148mm
centres in the following locations
B
- Roof panel to wall
C
- Roof panel to ridge beam - inside
G
- Wall sheet to wall channel - inside
Pre-drill and reinforce with extra screws at
296mm
centres in the following locations
A
- All sheet-to-sheet connections
D
- Wall corners
E
- Roof lip to sheet
F
- Sheet to channel
60303WK shown for illustrative purposes.
D
D
D
F
F
F
F
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
E
B
E
B
E
B
E
B
C
G
B G
Gable wall
Non-gable wall
The remaining steps are to be performed after the FINAL CONSTRUCTION
section of your product’s instruction manual.
