Absco Industries
Assembly Instruction Manual
ABSCO WORKSHOP SHED
MODEL: 60303WK
20’W x 10’D x 7’H
Model: 60303WK-PTX
2/03/2023
26
Australian Made
CENTRE PORTAL FRAME DETAILS
PART C1482
2950mm
80mm
80m
m
NOTE: If you have a slab with an edge rebate in your concrete slab, you will have to cut an amount
off the bottom of the frame legs equal to the depth of the rebate.
TIP: An easy way to make sure that the angle at
the top of the portal frame is correct is to use the
gable wall panel as a template to lay the sections
out. As the portal frame fi ts inside the walls, the
width of the frame will be 1.57” less than the
gable wall panel.
NOTE: Refer to the section
CENTRE PORTAL ASSEMBLY for
photos of the process.
1783mm
2x Apex plates
1x Knee plate
1x Knee plate
PART C1704
2045mm
3.15”
116.14”
3.15”
80.51”
70.20”
2 required.
