Absco Industries
Assembly Instruction Manual
ABSCO WORKSHOP SHED
MODEL: 60303WK
20’W x 10’D x 7’H
Model: 60303WK-PTX
2/03/2023
25
Australian Made
SINGLE DOOR PANEL
NOTE: Nuts and bolts are also supplied
and may be used instead of rivets. Use
a 1/8” drill bit to enlarge these holes in
the jamb
NOTE: The holes to fasten the padbolt hasp are not pre-
punched to allow for proper alignment. Position the hasp
centrally over the padbolt shaft and drill 1/8” holes and
secure with screws.
91A
91A
DOOR PANEL ASSEMBLY
B
