ABSCO SHEDS 3030RS-PTX Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 21

ABSCO SHEDS 3030RS-PTX Скачать руководство пользователя страница 15

Absco Industries

Assembly Instruction Manual

ABSCO RURAL SHED

MODEL: 3030RS-PTX

9’ 9 5/16” W x 9’ 9 5/16” D x 8’ 7/16” H

Model: 3030RS-PTX

19/07/2019

1.10

15

Wall Sheet Cladding

2270L

2270R

2400L

2400R

Repeat the process described for the roof
sheeting cladding for the side wall and back wall.
Be sure to fasten where the sheets overlap.

Use screws every second pan, fastening sheets
top and bottom girts and the edge roof purlin.
Fasten sheets to all frame uprights at 11 13/16”
spacings.

Once all sheets have been fitted to their
respective frames fit tek screws to the corners
where the side wall sheets meet the rear wall
sheets.

Fasten wall sheeting to side frame with three tek
screws where each purlin is located.
Wall sheeting not shown for illustrative purposes.

Finally apply trim (TR19). This covers the front
edge of the side sheets and the front frame
studs. Fasten with tek screws throught the front
and side.

214

Rear wall is 4x
214 sheet

TR19

«
...
13
14
15
16
17
...
»

Содержание 3030RS-PTX






















Отзывы:

Нет отзывов