Absco Industries
Assembly Instruction Manual
ABSCO RURAL SHED
MODEL: 3030RS-PTX
9’ 9 5/16” W x 9’ 9 5/16” D x 8’ 7/16” H
Model: 3030RS-PTX
19/07/2019
1.10
11
Wall Frame Assembly
Stand both side walls and join with
rear frame then the edge beam.
NOTE: During frame construction
the structure will be unstable until
complete. Consider using bracing,
timber or rope to stabilise and
prevent twisting or collapse.
Fasten the partially assembled edge beam to
side frames as shown. Use 8 tek screws to fix
to each side frame. Position side beam outers
(ZACO213) and fasten. Make sure wafer head
screws (FAST014) are used along the top face.
Cap the ends of the beam with an edge beam
end cap angle (ZACO155).
Fold one tab out 90 degrees for each rear frame
section so it can but up against the inside of the
side frame.
REAR FRAME
REAR
SIDE
3 1/8”
NOTE: Orientate
side frames so rear
purlin bracket is to
the rear of shed.
