Absco Industries
Assembly Instruction Manual
ABSCO BIN COVER
MODEL: 2308WBCK
2.27m W x 0.85m D x 1.15m H
Model: 2308WBCK
1.1
9
21/09/2022
FAST009
FAST012A
Sheet &
channel are
flush
4.
Now both channels are
attached, fasten their L&R pieces
to the CSJ with a self drilling
screw FAST096 in each top hole -
four screws total.
REAR PANEL ASSEMBLY
CONTINUED
5.
Align the side of the sheeting
with the end of the channels and
fasten with a self drilling screw
FAST096 through the hole in the
channel.
Do this at all corners - four
screws total.
6.
Stand up the panel.
Align the hinge FAST012A with
the holes in to the top of the
channel.
Make sure the bump of the hinge
is down and to the outside of the
panel.
Use a pop riveter and two
FAST009 rivets per hinge.
Fit all three hinges with six pop
rivets total.
4
5
Stand the panel up so holes
for hinges are to the top
‘bump’ of hinge
- This completes the rear panel -