Absco Industries
Assembly Instruction Manual
ABSCO BIKE SHED
MODEL: 230813BK-PTX
7.4‘ W x 2.5‘ D x 3.9‘ H, 4.3‘ H
Model: 230813BK-PTX
11/7/23
1.1
12
Australian Made
FRONT PANEL ASSEMBLY
1x required
1. Ensure that 54R channels are secured to 39D sheets.
2. Place the 89R jambs into position by nesting end
notches around the high edges of 54R channels.
3. Align top & bottom holes with corresponding holes
in 54R channeland fit FAST001 screws.
4. Squeeze 89R against rib in 39D sheets to align 89R
as straight as possible (check edge of jamb and
edge of rib.)
5. Pre-drill holes in 39D sheet using
holes in 89R jamb as guide.
6. Install FAST001 screws.
9. Place short side of 79A channel in
front of short side of 54R Channel.
10. Install FAST001 screws.
7. Place the 90A jamb into position by
nesting end notches around the
edges of the 89R jambs.
8. Install FAST001 screws.
