UK
31
Comment: Charger model SLS60 comes fitted with a timer (optional) that helps fix the charging time between ten
and sixty minutes (approximate data in minutes). If not using the timer and monitoring the start and stop time
manually (NO AUTO POWER OFF), turn the timer knob fully anticlockwise until you hear it click the second time (1
st
click = Stop, 2
nd
click = charging without timer).
- Position the main switch on "I”
At the time of charging, the temperature of the electrolyte solution in the battery must not be over 45°C. If before
the charge is complete, the temperature reaches 45°C, the load current must be reduced to extend the time and to
reduce the temperature of the solution until charging is complete.
- Once charging is complete, stop the charger by positioning the main switch on “0”. Next, disconnect the black (-)
clamp followed by the red (-) clamp. Always follow this procedure to avoid any risk of sparks or short-circuits.
Timer
Timer (10-60 min
setting)
Charging without
timer
