EN
12
Problem
11. Troubleshoo
ti
ng:
Possible Cause
Solu
ti
on
The Mini Jumpstarter does
not start up my vehicle
The clamps are not
connected properly.
Check that the clamps are
properly connected and
make sure that the
connec
ti
on points are clean.
The internal ba
tt
ery is not
recharged.
Check the charging
condi
ti
on of the internal
ba
tt
ery and then recharge it
if necessary.
The ambient temperature is
less than -10°C.
Carry out several start-up
a
tt
empts in order to warm up
the internal ba
tt
ery of the
Mini Jumpstarter.
The internal ba
tt
ery of the
MiniJumpstarter is above
55°C.
Place the unit in a well-
ven
til
ated place in order to
cool the ba
tt
ery down.
The voltage of the vehicle's
ba
tt
ery is above 15 volts
(24 volts).
You cannot use the Mini
Jumpstarter for this type of
vehicle.
The voltage of the vehicle's
ba
tt
ery is below 2 volts.
Use the “Override” mode
to start up the vehicle (see
chapter 8).
The temperature of the
MiniJumpstarter is too low.
Carry out several start-up
a
tt
empts in order to warm up
the internal ba
tt
ery of the
Mini Jumpstarter.
The vehicle's ba
tt
ery is
faulty.
Check the condi
ti
on of the
vehicle's ba
tt
ery.
The units is not supplying any
power to the devices
connected using the USB
ports.
The Mini Jumpstarter is not
switched on.
Press the power supply
bu
tt
on for 2 seconds.
The internal ba
tt
ery of the
Mini Jumpstarter is not
recharged.
Check the charging
condi
ti
on of the internal
ba
tt
ery and then recharge it
if necessary.
