ASSEMBLY INSTRUCTION
Assembly of the equipment takes professional installers about 1.5 hours.
If this is the first time you have assembled this type of equipment, plan to
spend more time. If you are in doubt about any part of this assembly, we
recommend you contact a professional installer to complete the assembly.
You may find it quicker, safer, and easier to assemble this equipment
with the help of an assistant, as some components may be large, heavy or
awkward to handle alone. It is important that you assemble your product
in a clean, clear, uncluttered area. This will enable you to move around the
product while you are fitting components and reduce the possibility of injury
during assembly or damage to the area or equipment.
Note
As with any assembled part, proper alignment and adjustment is critical.
While tightening the fasteners, be sure to leave room for adjustments.
Do not fully tighten the fasteners until instructed to do so. Be careful to
assemble the components in the sequence presented in this guide.
Training Area and Free Area
Please allow for free area beyond the
training area of 24 in / 60 cm on all
sides of the unit to ensure that the
training area is not impeded.
Free Area
Maximum Wt. Capacity: 200 lbs / 90.7 kg
Maximum User Weight: 330 lbs / 150 kg
Product Total Surface: 73.1*31.9 in / 185.6*81 cm
Specifications
10
50 in / 127 cm
79
in
/
2
00
c
m
Содержание GLUTE COASTER ABS1020
