background image

TROUBLE SHOOTING    

 

10

 

Fault Possible 

Cause 

Remedy 

The mixer does not 
operate /start. 

Not plugged in. 

 
The main switch is “off”. 

 
The bowl safety cover is 
open. 

 
The mixer overload has 
been tripped. 

 
Stop button is still locked 
in the down position. 

Plug in and switch 
on. 

 
Turn the switch on. 

 
Place it down 
position. 

 
Contact supervisor / 
service agent. 

 
Release by rotating 
and pulling out. 

The mixer starts and 
then stops. 

Both high and low speed 
timers are set to zero. 

 
The mixer overload has 
been activated. 

 
Fuse blown internally. 

Set mixing time on 
both timers. 

 
Contact supervisor / 
service agent. 

 
Contact supervisor / 
service agent. 

The mixer labors under 
load.  Belts screech. 

 
Dough too stiff / tight. 

 

 
Machine malfunction. 

Review and adjust 
dough consistency, 
eg. Add more liquid.

 
Contact supervisor / 
Service agent. 

The mixer moves or 
rocks during operation. 

Floor not level or the 
adjustable feet are 
located incorrectly. 

Readjust level and 
stabilize by means 
of adjustable foot. 

Excessive flour dust 
coming from mixer. 

First speed timer set too 
short. 

Extend first speed 
mix / blending cycle.

The mixer bowl and 
dough hook operate in 
the wrong direction. 

Mixer is plugged into a 

new electrical socket 

after cleaning or moved 

in bakery. Polarity of 3 

phase plug reversed. 

Return to original 
position in bakery. 

 
Consult authorized 
electrical service to 
rewire plug; swap 
white and black 
wires in plug. 

Содержание ABSFBM-200T























Отзывы: