8
Busy ICM Callback
When you call another extension and get a busy sig-
nal, do not hang up
Press the [
FEAT
] button and dial
43
or
Press the [
ICM CALLBACK
] button (if assigned)
Hang up after you hear a confirmation tone
When the busy extension becomes available, the
system will call you back
Lift receiver
You are automatically connected to the extension.
Busy Number Callback
When an outside number you have called is busy, you
may tell the system to remind you to try again.
Do not hang up
Press the [
FEAT
] button and dial
24
or
Press the [
TRUNK CALLBACK
] button (if assigned)
Dial the desired time you want to be called back
Hang up after you hear a confirmation tone
After the set time, the system will call you back to try
again
Lift receiver to automatically dial the number
To Cancel Busy Number Callback
Lift the receiver
Press the [
FEAT
] button and dial
024
or
Press the [
TRUNK CALLBACK
] button and
*
Hang up after you hear a confirmation tone
Call Coverage
Multipurpose buttons on digital multiline telephones
can be assigned as Call Coverage buttons to indicate
calls ringing at another extension. If you have a Call
Coverage button for another extension on your tele-
phone, you can answer calls ringing at that extension
by pressing the Call Coverage button.
13
Set Follow Me Destination
♦
Lift the receiver (handset)
♦
Press [
FWD
] + [
FWD
]
♦
Enter the Call Type you wish to forward
1 = All calls (CO/Intercom)
2 = CO calls only
3 = Intercom calls only
♦
Enter the extension number of the originating
forwarding station
Hold/Quick Forward Operation
♦
If your phone is equipped with this feature,
pressing [
HOLD/DND
] will automatically forward
all incoming calls to you fixed call forward desti-
nation.
Master Hunt Groups
X-EO allows extensions to be programmed into Hunt
Groups. Each Hunt Group is assigned code and when
dialed the system searches for the first idle extension.
To Call a Hunt Group
♦
Lift the receiver
♦
Wait for the dial tone
♦
Dial Hunt Group access code
or
♦
Press [
HUNT
] if assigned as a Multipurpose
button
Message Waiting
To Leave a Message
When the extension you are calling is busy or does
not answer
♦
Do not hang up
♦
Press the [
MESSAGE
] button and
#
♦
After you hear a confirmation tone, hang up
The [
MESSAGE
] button lamp will stay lit at the
called extension.
To Cancel Message Waiting
If you want to cancel a message you left at an exten-
sion
♦
Lift the receiver
♦
Press the [
MESSAGE
] button and
*
then
dial the extension number
♦
After you hear a confirmation tone, hang up
The [
MESSAGE
] button lamp will go out at the
extension.
Note: This feature is not available if the [MBOX] key is used for
voicemail access.
