13
14)
Using your brush, isopropyl alcohol and lint-free cloth, clean the board thoroughly and
make sure no flux residue is left.
15)
Using a wire striper, strip the positive (red) and the negative (black) wires of the AA battery
holder.
16)
Insert the positive and the negative wires of the battery holder in the appropriate hole on
the board (PW) and solder them from the bottom side. Insert two AA 1.5V batteries.
17)
Place the header jumper between pin 2 and 3 on ASW. Plug in your headphone/earphones
and turn ON the FM receiver by pressing the PSW push button once.
18)
You have completed the assembly of your module.
For more Educational D.I.Y. Kits visit
https://abra-electronics.com/educational-kits-trainers/
