background image

INSTRUCTION MANUAL

2

2  Y

YE

EA

AR

R  W

WA

AR

RR

RA

AN

NT

TY

Y  (RESTRICTIONS APPLY)

Imada, Inc. warrants its products to the original purchaser to be free from defects in work-

manship and material under normal use and proper maintenance for two years (one year for
adapters, attachments and cables) from original purchase.This warranty shall not be effective
if the product has been subject to overload, shock load, misuse, negligence, accident or
repairs attempted by others than Imada, Inc.

During the warranty period, we will, at our option, either repair or replace defective products.

Please call our customer service department for a return authorization number and return the
defective product to us with freight prepaid.

The foregoing warranty constitutes the SOLE AND EXCLUSIVE WARRANTY, and we hereby

disclaim all other warranties, express, statutory or implied, applicable to the products and/or
software, including but not limited to all implied warranties of merchantability, fitness, non-
infringement, results, accuracy, security and freedom from computer virus. In no event shall
Imada, Inc. and/or its affiliated companies be liable for any incidental, consequential or punitive
damages in connection with the use of its products and/or software.

Model DTX2

Cap Torque Tester

Specifications subject to change without notice.

Distributed by:

 ABQ Industrial LP USA

Tel: 

+1 (281) 516-9292 / (888) 275-5772  

eFax:

 +1 (866) 234-0451

 

Web: 

http

s

://www.abqindustrial.net  

E-mail: 

[email protected]

Содержание DTX2









Отзывы: