ABOVE&BEYOND PAGK44R, Руководство пользователя

Страница: 8 / 54

EN
P. 0
8 - P
. 0
9
3. Fit the connected tubes into the corner pieces. Ensure that the keder groove is facing down.
4. Connect the corners of the roof frame diagonally with each other using the steel cables. Tension the cables manually and
evenly using the turnbuckles. Ensure that the frame is not skewed and ensure that the keder groove is facing down.
FIGURE 1B FIGURE 1A
FIGURE 3A FIGURE 3B
FIGURE 2A FIGURE 2B FIGURE 2C
Assembly
1. Lay the four corner pieces approximately the correct distance from each other.
2. Lay all the horizontal tubes between the corner pieces and connect them together using the connector piece. See figure 1b.
TIP: USE A GROUNDSHEET TO PREVENT THE TENT CANVAS FROM GETTING DIRTY DURING ASSEMBLY.
PAY ATTENTION - THE HORIZONTAL TUBES FOR THE PAGODA TENT OF 3 X 3 M ARE MADE IN ONE PIECE.