ABOVE&BEYOND PAGK44R, Руководство пользователя

Страница: 10 / 54

EN
P. 10 - P
. 11
10. IF YOU ARE NOT USING THE SIDE WALLS, YOU CAN SKIP THIS STEP
. Slide the suspension eyes of one half of a side
wall up, one by one, via the keder groove in the roof frame. Now slide the keder rope on the side of the side wall into the corner
pole from top to bottom. Affix all the side walls half by half using this method.
11. Slide the tubes of the base frame over the horizontal rod of the base plate. Then
place the R-pin as illustrated in figure 9 to prevent the base frame from sliding off
the rod.
PLEASE NOTE!
For a tent with side walls, slide the tube of the base frame
through the groove provided at the bottom of the side wall.
12. Attach the ratchets with the D-ring at the bottom of the base plate and the
short tension strap with S-hook at the top of the strings on the corners of the
roof.
13. Tighten the loops you fastened earlier (step 7) to ensure that the roof canvas
will remain tight during heavy rain.
FIGURE 8A FIGURE 8B
FIGURE 9
FIGURE 10