LED FULL CUTOFF WALL PACK
FOR 30W/ 38W FULL CUTOFF WALL PACK
Universal voltage driver permits operation at 120V
thru 277V,50/60Hz
FOR 20W FULL CUTOFF WALL PACK
Universal voltage driver permits operation at 120V
thru 277V,50/60Hz
FOR 52W FULL CUTOFF WALL PACK
Universal voltage driver permits operation at
120V thru 277V,50/60Hz
Ref#: 10050-21020
INSTALLATION
Install the fixture as the picture shows.(Installation height
≥ 6.6ft.)
≥6.6 FT.
GROUND
WALL
FIXED HOLE
CLIP
SCREW
BASE COVER
TOP COVER
WARRANTY
LED
BOARD
GROUND
GROUND
L
N
ACN(WHITE)
ACL(BLACK)
POWER
RED(+)
RED
(DC+)
BLACK
(DC-)
BLACK(-)
WAGO
WAGO
WAGO
WAGO
WAGO
GROUND
GROUND
LED
BOARD
RED(+)
RED
(DC+)
BLACK
(DC-)
BLACK(-)
POWER
DIMMER
ACN(WHITE)
ACL(BLACK)
N
L
DIM+(PURPLE)
DIM-(GRAY)
VAUX/12V
(YELLOW)
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
WAGO
GROUND
N
L
DIM+(BLUE)
RED(+)
RED
(DC+)
BLACK
(DC-)
BLACK(-)
DIM-(WHITE)
DIMMER
ACN(BLUE)
GREEN/YELLOW
ACL(BROWN)
LED
BOARD
POWER
Instructions Manual
1.Cut off the power before installation.
2.Unscrew the two fixed screws,unload the top cover, and fix
the base cover to the wall.
3. Pass the three phase cable by the base or 1/2NPT hole,
and connect it with AC driver and ground wire.
4. Connect DC wire from the reflector hole with DC LED
board. (Caution: red to red, black to black)
5.Close the cover, and tighten the two fixed screws.
6.Choose the suitable place to install, connect the power to
lighten up.(Finish the installation)
LIMITED FIVE-YEAR WARRANTY. Should this product fail to perform satisfactorily due to a defect or poor workmanship
within five years from the date of purchase, return it to the place of purchase and it will be replaced, free of charge.
Incidental or consequential damages are excluded from the warranty.
Add:
1501 Industrial Way N. Toms River, NJ 08755
Phone:
866-222-8866
E-mail:
Web:
www.aboveallLighting.com ©2016 ABOVE ALL, Inc. All rights reserved
