LED FULL CUTOFF WALL PACK
Instructions Manual
SUITABLE FOR MODEL
IMAGE MAY VARY FROM ACTUAL PRODUCT
SAFETY INSTRUCTION
MAINTENANCE CAUTION
READ CAREFULLY BEFORE INSTALLING FIXTURE. PLEASE KEEP THIS MANUAL FOR FUTURE USING.
Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding
is required for safety.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
MAKE CERTAIN POWER OFF BEFORE INSTALLING OR MAINTAINING FIXTURE.
CHECK THAT VOLTAGE IS COMPATIBLE WITH FIXTURE DRIVER, USE APPROVED CONNECTORS FOR
ALL ELECTRICAL CONNECTIONS.
1. Review the wire connection before beginning, and make sure fixture is grounded properly.
2. For lighting controls, using functioning correctly.
3. Turn power off and wait for fixture cooling to operate.
4. Maintenance must be done by professionals.
WIRE CONNECTION
FOR 20W/30W/ 38W FULL CUTOFF WALL PACK WITH
PHOTOCELL
FOR 52W FULL CUTOFF WALL PACK WITH PHOTOCELL
Led Board DC IN+
Led Board DC IN-
BLACK
RED
WAGO
WAGO
RED
BLACK
AC IN
AC IN
PHOTOCELL
GROUND IN
BLACK
WHITE
RED
WAGO
WAGO
WAGO
WAGO
RED
BLACK
POWER OUT(DC)
POWER IN(DC)
POWER SUPPLY
RED
BLACK
WHITE
GREEN
BLACK
Led Board DC IN+
Led Board DC IN-
BLACK
RED
AC IN
AC IN
PHOTOCELL
GROUND IN
WAGO
WAGO
WAGO
WAGO
POWER SUPPLY
POWER OUT(DC)
POWER IN(DC)
WAGO
WAGO
BLACK
WHITE
RED
Universal voltage driver permits operation at 120 or
277V, 60Hz
Universal voltage driver permits operation at 120 or
277V, 60Hz
Add:
1501 Industrial Way N. Toms River, NJ 08755
Phone:
866-222-8866
E-mail:
Web:
www.aboveallLighting.com ©2016 ABOVE ALL, Inc. All rights reserved
