A31T216RLN Shield Board Quick Guide
3. Build and Run Project (Shield Board)
15
3.3
Starter Kit Connection to PC
3.3.1
USB Connection with USB 2.0 Cable
Connect a USB 2.0 (Micro-B type) cable to the Starter Kit as shown in Figure 11. When the PC is
connected correctly to the other end of the USB 2.0 cable, the following actions are performed:
1.
The power LED on the device board is turned on.
2.
The status LED on the A-Link board (debugger) is turned on.
Figure 11. Starter Kit and USB Connection
