APL1400-200 User’s Manual 2
Version 1.1
1.
Please read all instructions before installing and operating APL1400-200 and keep all
instructions for later reference.
2.
Please follow all warnings and instructions marked on the product.
3.
Unplug the AC coupler from the wall outlet before cleaning. Use a damp cloth for
cleaning. DO NOT use liquid cleaners or aerosol cleaners.
4.
DO NOT operate APL1400-200 near water.
5.
APL1400-200 should never be placed near or over a radiator, or heat register.
6.
APL1400-200 relies on the building’s electrical installation for short-circuit (over current)
protection.
7.
Ensure that a fuse or circuit breaker no larger than 120 VAC 15A or 240 VAC 6A is used on
the phase conductors (all current-carrying conductors).
8.
DO NOT allow anything to rest on the APL1400-200 interconnect cables. DO NOT locate
APL1400-200 where people may walk on the cables.
9.
APL1400-200 has its own power filter for protection against surges.
10.
APL1400-200 is NOT field serviceable and should not be opened under any circumstance.
Opening or removing covers may result in exposure to dangerous voltage points or other risks.
11.
Unplug the AC coupler from the wall outlet and refer the product to qualified service
personnel for the following conditions:
When the interconnect cords are damaged or frayed.
If liquid has been spilled into the product.
If the product has been exposed to rain or water.
If the product does not operate normally when the operating instructions are followed.
If the product exhibits a distinct change in performance.
I
MPORTANT
S
AFETY
I
NSTRUCTIONS
