APL1400-200 User’s Manual 12
Version 1.1
2. Software Installation
Please follow the steps described in this section to install your Ultra NetBridge
™
Utility.
2.1. System Requirements
Before installing Ultra NetBridge
™
Utility, make sure the PC meets these requirements for
hardware installation:
Microsoft Windows* 98SE, ME, 2000, XP or Vista
Pentium® 166 MHz processor, equivalent or higher
One free Ethernet port for UltraSpeed
™
™
™
™
Series PowerLine NetBridge
™
30M free disk space
Only supported network components are installed:
Network Clients: Client for Microsoft Networks, Client for Netware Networks
Network services: File and print sharing for Microsoft Networks
Network protocols: Microsoft’s TCP/IP, IPX/SPX, NetBEUI, or Net BIOS support for
IPX/SPX
2.2. Installation
Before the installation, please close the application (if an older version is running) and uninstall it.
To install the application just run the setup executable program Setup.exe in the Product CD-ROM,
and follow the steps of the installation wizard. To start the Ultra NetBridge
™
™
™
™
Utility installation,
press “Next>”:
