User Manual
Zia 8.000 series
Zia-8000_9CND_UserManual_5DUCNP20b_EN_v01-01.docx
Page 26 of 32
5.9
Install the brewer:
Carry out the following procedure to replace the brewer:
1. Place the brewer in the bracket.
2. Push the brewer firmly in the machine until you hear a click and the green handle is
turned downwards in its home position.
Caution:
Make sure that the green handle is in the down
position.
When the brewer isn’t installed correctly, the brewer can
jump out of the seating during a cycle.
3. Make sure that the green handle is in the down position.
When the brewer isn’t installed correctly, the brewer can jump out of the seating
during a cycle.
4. Place the tubes.
5. Close the door or place the safety key in the door
6. Check correct functioning by taking test beverages.
Picture may be different based on model.
