Abocom WU5206, Руководство пользователя

Страница: 17 / 62

This value should remain at its default setting of 2347. Should you encounter
inconsistent data flow, only minor modifications of this value are
recommended.
Fragment Threshold : User can adjust the Fragment threshold number by
sliding the bar or key in the value directly. The default value is 2346. The
mechanism of Fragmentation Threshold is used to improve the efficiency when
high traffic flows along in the wireless network. If your Wireless LAN Adapter
often transmits large files in wireless network, you can enter new Fragment
Threshold value to split the packet. The value can be set from 256 to 2346.
Authentication and Security tab:
Authentication Type: There are several types of authentication modes
including Open, Shared, Leap, WPA, WPA-PSK, WPA2 and WPA2-PSK .
•
Open : If your access point/wireless router is using " Open” authentication,
then the wireless adapter will need to be set to the same authentication type.
•
Shared : Shared key is when both the sender and the recipient share a secret
key.
•
LEAP: Light Extensible Authentication Protocol. It is an EAP authentication
type used primarily in Cisco Aironet WLANs. It encrypts data transmissions
using dynamically generated WEP keys, and supports mutual authentication
(only with CCX mode enabled.)
•
WPA/ WPA-PSK/ WPA2/ WPA2-PSK: WPA or WPA-PSK
authentications offer two encryption methods, TKIP and AES. For
WPA-PSK, select the type of algorithm TKIP or AES and then enter a WPA
Shared Key of 8-64 characters in the WPA Pre-shared Key
field.
Encryption Type: For Open and Shared authentication mode, the selection of
encryption type are None and WEP . For WPA, WPA2, WPA-PSK and
WP A2-PSK authentication mode, the encryption type supports both TKIP and
AES .
WPA Pre-shared Key : This is the shared secret between AP and STA. For
WPA-PSK and WPA2-PSK authentication mode, this field must be filled with
character longer than 8 and less than 64 lengths.
WEP Key : Only valid when using WEP encryption algorithm. The key must
match with the AP’s key. There are several formats to enter the keys.
•
Hexadecimal (128bits): 26 Hex characters (0~9, a~f).
•
ASCII (128bits): 13 ASCII characters.
Show Password : Check this box to show the password you en02tered.
802.1x Setting : When user use radius server to authenticate client certificate for
WPA authentication mode (WPA authentication do not support EAP Method-
MD5-Challenge).
-
13 -