Abocom WR5205G, Руководство пользователя

Страница: 15 / 59

12
192.168.1.100 should work for most cases.
End IP Address The end IP address, the maximum is 254. If “ Start IP Address ” is set at
192.168.1.100 and the “ End IP address ” is 192.168.1.200, the device
will distribute IP addresses from 192.168.1.100 to 192.168.1.200 to all
the computers in the network that request IP addresses from DHCP
server (Router).
Subnet Mask
The subnet mask of the distribute IP addresses clients, the subnet mask
must be set at the same segment as the Wireless Router.
Primary DNS Server
Secondary DNS
Server The DNS should be set to the address provided by your ISP.
Default Gateway
Enter the default gateway IP address provided by your ISP in this
column.
Lease Time
The lease time of the distribute IP Addresses. Default settings are 86400
seconds.
Step 4- Network Mode
This step can set up wireless network mode, network name and channel.
Network Mode Select 11b/g mixed mode, 11b only, 11g only, or 11b/g/n mixed mode
from the pull-down menu. (Default is 11b/g/n mixed mode.)
Network Name
(SSID) A SSID is referred to a network name because essentially it is a name
(case-sensitive) that identifies a wireless network.
Frequency (Channel) Select 1~11 or Auto Select from the pull-down menu.
Step 5- Security
Here can set up the wireless security of the Wireless Router.