41
Wireless Station Configuration
•
This section applies to all Wireless stations wishing to use the Wireless Router's Access
Point, regardless of the operating system that is used on the client.
•
To use the Wireless Station with Wireless Router, each Wireless Station must have
compatible settings, as follows:
Mode
The mode must be set to
Infrastructure
.
SSID (ESSID)
This must match the value used on the Wireless Router. The default
value is
Untitled
.
Note! The SSID is case sensitive.
WEP
By default, the security setting on the Wireless Router is
Disabled
.
•
If security setting remains disabled on the Wireless Router, all
stations must have it disabled.
•
If security setting is enabled on the Wireless Router, each station
must use the same settings as the Wireless Router.
WPA
WPA2 (AES)
WPA2 Mixed
WPA (TKIP/AES)/ WPA2 (AES)/ WPA2 Mixed: If one of these
securities is enabled on the Wireless Router, each station must use the
same settings as the Wireless Router. If there is no security is enabled on
the Wireless Router, the security of each station should be disabled as
well.
Note:
By default, the Wireless Router will allow both 802.11b and 802.11g connections.
