20
specify the packet size.
The RTS mechanism will be activated if the
data size exceeds the value you set.
. The default value is
2347
.
Warning:
Enabling RTS Threshold will cause redundant network
overhead that could negatively affect the throughput performance
instead of providing a remedy.
This value should remain at its default setting of
2347
. Should you encounter
inconsistent data flow, only minor modifications of this value are
recommended.
Short Preamble
Select Disable or Enable this function, default setting is Disable. A
preamble is a signal used in wireless environment to synchronize the
transmitting timing including Synchronization and Start frame
delimiter.
Short Slot
Select Disable or Enable this function, default setting is Enable.
Tx Burst
Select Disable or Enable this function, default setting is Enable.
Pkt_Aggregate
Select Disable or Enable this function, default setting is Enable.
Wi-Fi Multi Media
WMM Capable
Select Disable or Enable this function, default setting is Enable.
APSD Capable
Select Disable or Enable this function, default setting is Disable.
WMM
Parameters
Click the
WMM Configuration
button to go further settings.
Apply
Click to save and apply the current settings.
Cancel
Click to discard the current settings.
Security
Select SSID
SSID choice
Select the SSID form the pull-down menu for security settings.
Security Mode
There are eleven type of authentication modes including
Disable
,
Open, Shared, WEP Auto, WPA, WPA-PSK, WPA2, WPA2-
PSK
,
WPA-PSK/WPA2-PSK, WPA1/WPA2 and 802.1X.
•
Open
: If your wireless router is using "
Open”
authentication, then the
