8
AP Mode
AP Mode Settings
Alias Name
Display the name of this device.
Band
You can choose one mode of the following you need.
~
2.4GHz
(B):
802.11b supported rate only.
~
2.4GHz
(G):
802.11g supported rate only.
~
2.4GHz
(B+G):
802.11b supported rate and 802.11g supported rate. The
default is 2.4GHz
(B+G)
mode.
SSID
The SSID differentiates one WLAN from another; therefore, all access
points and all devices attempting to connect to a specific WLAN must use
the same SSID. It is case-sensitive and must not exceed 32 characters. A
device will not be permitted to join the BSS unless it can provide the unique
SSID. A SSID is also referred to as a network name because essentially it is
a name that identifies a wireless network.
Channel
Number
Allow user to set the channel
manually
or
automatically
.
If set channel manually, just select the channel you want to specify.
If “Auto” is selected, user can set the channel range to have the Wireless
Portable Router automatically survey and choose the channel with best
situation for communication.
The number of channels supported depends on the region of this Access
Point. All stations communicating with the Access Point must use the same
channel.
Mode
Select the mode form the pull-down list including
AP, WDS Bridge
and
WDS Repeater
.
